- INSTALL ASTERISK FROM USB STICK 32 BIT
- INSTALL ASTERISK FROM USB STICK ISO
- INSTALL ASTERISK FROM USB STICK MAC
- INSTALL ASTERISK FROM USB STICK WINDOWS
Now insert the SD card and plug your USB drive into the RPi. Edit this file in any text editor, and locate the text root=/dev/mmcblk0p2
Now locate the file cmdline.txt on the SD card used for booting (not to confuse with the USB drive). Step 4: Configure the RPi to use the external root partition On MAC/Linux mount the first partition of the USB drive (sized 75MB) and copy the files from there. Just copy the files on this drive over to the SD card.
INSTALL ASTERISK FROM USB STICK WINDOWS
On Windows this is easy, as you will only see the FAT partition of this device. If the card is already formatted with a FAT32 partition (as all cards are off the shelf) then just delete all files on this card and copy over the files from the first partition of the USB drive created in step 2.
Or create a new card, which doesn’t need to be large or fast, even an old one with only 64MB is sufficient. You can use the SD card you’ve been using before to run RasPBX and in this case directly continue with step 4. The RPi still needs an SD card to boot from, but only to load boot loader and kernel, everything else runs off the external drive. The USB drive has to be large enough, it has to have 4GB or more if the original RasPBX image file is used or at least the size of the SD card you’ve been using before. Better double and triple check this step to make sure you are really writing to the right device. Watch out with this step! Don’t use the wrong /dev/sdX as you might accidentally erase one of your computer’s hard drives. Replace /dev/sdX in the command above with the actual device of your USB drive. On MAC/Linux, the command is: sudo dd bs=1M if=./backup.img of=/dev/sdX On Windows, use Win32 Disk Imager again, select the image file as source and the USB drive as destination. With this step you are deleting all data on your drive, no matter how large it is! If you have skipped step 1, use the original RasPBX image file (raspbx-date.img) instead of the backup image file from step 1. Now copy the image file to the external USB HDD or thumb drive, in the same way as you’ve done it with your SD card initially. Step 2: Copy the image file to your USB drive Run sudo fdisk -l to get a list of all disks on your system. Replace /dev/sdX in the command above with the actual device of your card reader.
INSTALL ASTERISK FROM USB STICK MAC
On MAC and Linux, run this command on the console: sudo dd bs=1M if=/dev/sdX of=./backup.img Copy the whole SD card to an image file on your hard drive. On Windows, insert the SD card into your reader and start Win32 Disk Imager. You can skip this step and continue with step 2 if you have nothing configured yet or want to start from scratch again. Step 1: Copy the SD card back to an image fileĪssuming you have already installed and configured everything on your SD card, and you want to move this over to the USB drive now. But it can still be useful having the root partition on a thumb drive and the procedure is identical to HDDs anyway, so they are covered here, too. Thumb drives are not really more reliable than SD cards, there is not much gained using them instead of SD cards reliability wise. The RPi’s USB port is not strong enough to power a hard drive on its own. When using an HDD, it has to have it’s own power supply. The number of writes per sector of an SD card is limited, HDDs instead are much more reliable. HDDs (and also SSDs of course) are much faster than SD cards. So I must be doing something wrong, but I don't know what.It is possible to have the root partition on an external USB drive and run RasPBX from there. When I run /etc/init.d/autofs status, it only returns 'running', no information about the mountpoints is returned.
INSTALL ASTERISK FROM USB STICK ISO
Since Centos 6.5, you can create usb drive bootable by simply transferring iso file to usb using dd command. Step 2: Make A bootable Drive After you have downloaded the ISO image, make a bootable USB drive.
INSTALL ASTERISK FROM USB STICK 32 BIT
I found out about autofs, but I can't get it to work. Asterisk From Usb Stick Download From Its Asterisk From Usb Stick 32 Bit ISO Image This is primariIy due to th fact that mst servers in prduction are 64 bit. This of course does not work while the system is running, only at boot time. UUID=23A0-5AE6 /mnt/stick vfat defaults,users,uid=asterisk,gid=asterisk,umask=022, 0 0 So far I accomplished that the stick is mounted OK at system boot time.
The stick should have r/w permisisons for user asterisk with UID 499 and group asterisk with GID 498. This should not only work at boot time, but also when the system is running. Everytime a certain USB stick is connected it must get mounted automatically at a predefine location.
0 kommentar(er)
